The Scorpia handle is equipped with the latest Vecta 2 mechanism. The entire handle and mechanism cassette is made of glass reinforced polyamide giving it unequaled strength. The join where the handle meets the barrel is critical as any weakness here can be a safety issue and any movement will drastically affect accuracy. The Rob Allen handle consists of a webbed internal spigot that is further reinforced by external shrouds totally eliminating any flex at this critical junction.
The handle has an integrated reel bracket so the Rob Allen Vecta reel can be mounted without needing any screws and is shaped to prevent any chance of the shooting line catching when a reel is not fitted.
The Scorpia grip is molded from PVC and is held in place by two cheek plates to prevent twisting. There is an extra strong through bolt fitted at the base of the handle for extra strength where the floatline will be attached and the Scorpia comes with a webbing loop already threaded on.
The Vecta mechanism features a mechanical line release. The sear is milled out of solid stainless steel and all pivot pins are made of stainless steel for strength under high loads.
The Scorpia Speargun features a tube barrel constructed of aircraft grade aluminium.
Our guns are fitted with the new Rob Allen Low-Profile Vecta muzzle. The low-profile of this latest muzzle makes for extremely low drag through the water and the very clear sight pattern along the spear usually reserved for open-muzzle designs. The muzzle accommodates two rubbers (it is not recommended to fit two rubbers to your Scorpia gun) that are clipped into place preventing ‘muzzle flip’ when fired. The shape of the muzzle guides the rubber in a straight line, parallel with the barrel and spear.
Like the handle the Vecta muzzle is constructed of bomb proof glass reinforced polyamide and the critical muzzle-barrel interface consists of an extra long internal spigot with external shrouds.
The muzzle hole attachment point has been shaped to accept an optional stainless steel shackle recommended when a reel has been fitted.
Rob Allen spears are a triumph of engineering. They are constructed of extremely high tensile spring steel that has been tempered to an incredible 2100mpa. They are fitted with an over-sized stainless steel flopper on the bottom of the spear that has been perfectly hand-tuned to flop easily the first 40 degrees and then jam open. The flopper is held on by a stainless spring steel pin for maximum flopper retention. The shooting line hole and notches have been precision cut and perfectly finished to never damage either your shooting line or wishbones.
The Scorpia comes with a 6.6mm single notched shaft. The length of the overhang varies between the different sized guns as the balance point over the muzzle changes when the spear isn’t supported by a rail.
The spear is attached to the muzzle via a single wrap of 1.8mm monofilament.
The Scorpia comes fitted with a single 16mm rubber with a dyneema wishbone.